News and articles of the portal

      11.11.2019
      New sizes are available now in the Engineering portal: galvanized steel - DX54D (0.79) and hot-rolled steel - S420MC (2 mm; 2.5 mm).
      07.10.2019
      New grades are available now in the Engineering portal: galvanized high-strength - HX220YD, HX260YD, HX260LAD, with bake hardening effect - HX220BD, HX260BD, and galvanized hot-rolled dual phase - HDT580F+Z (including data on hole expansion ratio).
      20.08.2019
      Two new grades of hot dip galvanized steel appeared in the database of the Engineering Portal - DX56D and HCT780X with a thickness of 0.7 mm and 1.4 mm, respectively.
      16.08.2019
      A new grade 09G2S with a thickness of 8 mm has appeared in the database of the Engineering Portal.
      05.08.2019
      A new article on hot stamping technology has been prepared.
      31.07.2019
      A new grade HCT980X with a thickness of 1 mm has appeared in the database of the Engineering Portal.
      29.07.2019
      A new grade for heat treatment and hot stamping is added to the database of the Engineering Portal - 30MnB5. Mechanical properties are available for 800 ° C and 900 °.
      28.05.2019
      Based on the materials of the WorldAutoSteel International Automobile Steel Association, we have prepared an article about the current trend - lightweighting or reducing body weight: which is better than steel or aluminum?
      18.04.2019
      New grades have appeared in the database of the Engineering Portal: high-strength hot-rolled steels 10KHSND and HDT580X (with a two-phase structure). AutoForm cards are available in both the R7 version and the new R8 version. Prepared data on weldability (SEVERDOM550, SEVERWELD690, SRS700) and fatigue strength (S355MC, S500MC, S550MC, S600MC, S690QL, S700MC).